Software solutions
Software
In addition to the comprehensive software portfolio of the evaluation and analysis specialists at Q-DAS and the Tequim test equipment management software, we also offer specialized analysis tools for various measuring equipment. These tools are tailored to the specific requirements and characteristics of different products and manufacturers to ensure precise and efficient analysis.
By combining these high-quality software solutions, we enable a comprehensive and detailed evaluation that helps to optimize production processes and ensure the highest quality standards.
Q-DAS qs-STAT
Due to its popularity, especially in the automotive sector, qs-STAT has become a synonym for statistical analysis of measured values. Whether sample evaluations or machine or process capability analyses – qs-STAT enables you to carry them out quickly and efficiently on the basis of numerous statistical methods and a variety of distribution models. Evaluation strategies available as standard in the program (e.g. from Bosch, VW and BMW) shorten the time required to create test reports enormously and allow you to determine process parameters and quality within a very short time. Quality control charts, histograms, comparison diagrams and other graphics can be used to display the results simply and clearly, so that the key aspects of the measurements can be seen quickly, for example on the preconfigurable test reports.
The communication options to your other software systems have been successively expanded in recent years; program interfaces to MES, CAQ or ERP systems ensure that you can also use and process the data beyond the Q-DAS software system. Many leading companies around the world therefore rely on Q-DAS solutions to support their quality management efficiently and reliably. As a result, the high status of this product has continued to grow over the years, not only within the automotive sector.
Q-DAS CAMERA Concept
The Q-DAS CAMERA concept offers an end-to-end solution for assessing manufacturing and production in all phases of the quality data flow.
With the “right view” of your processes and the transparent presentation of process behavior using clearly structured graphics and key figures, you can identify potential for improvement and derive measures for process optimization.
But what does the acronym “CAMERA” stand for? This summarizes the 6 phases of this holistic quality approach:
– COLLECTING (manual data entry with procella My.SPC, data transfer in Q-DAS ASCII transfer format)
– ASSESSING (MCA/CMM Reporting, Q-DAS Monitoring, procella online)
– MANAGING (SPC test planning, SAP interface (QM-IDI))
– EVALUATING (qs-STAT, SAP interface (QM-STI))
– REPORTING (Reporting System, Form Designer, qs-STAT Web)
– ARCHIVING (long-term evaluation, data compression)
With our Q-DAS software modules, we offer you the tools you need to fully integrate and largely automate this entire process – from data acquisition, analysis and data archiving through to the reporting system – in your company.
TEquiM TESTING MANAGEMENT
In cooperation with our partner calibration laboratory CQS, we offer you TEquiM, a customized yet cost-effective software for managing your test equipment.
This database-based software system can read calibration protocols and certificates from the CQS calibration laboratory, integrate data via data carriers or online and even enables remote management via an Internet connection. This gives you password-protected access to all test equipment data at all times.
TEquiM can be downloaded as a demo version and tested free of charge.
VectorPro®
VectorPro is an advanced force testing software package designed to perform tensile, shear, flexure and compression tests on materials, components and products. Display measurement data graphically and quickly create individual test reports.
Simply select an ELS load cell and a set of fixtures and you’re ready to perform advanced testing with the power of VectorPro.
Q-DAS qs-STAT
Due to its popularity, especially in the automotive sector, qs-STAT has become a synonym for statistical analysis of measured values. Whether sample evaluations or machine or process capability analyses – qs-STAT enables you to carry them out quickly and efficiently on the basis of numerous statistical methods and a variety of distribution models. Evaluation strategies available as standard in the program (e.g. from Bosch, VW and BMW) shorten the time required to create test reports enormously and allow you to determine process parameters and quality within a very short time. Quality control charts, histograms, comparison diagrams and other graphics can be used to display the results simply and clearly, so that the key aspects of the measurements can be seen quickly, for example on the preconfigurable test reports.
The communication options to your other software systems have been successively expanded in recent years; program interfaces to MES, CAQ or ERP systems ensure that you can also use and process the data beyond the Q-DAS software system. Many leading companies around the world therefore rely on Q-DAS solutions to support their quality management efficiently and reliably. As a result, the high status of this product has continued to grow over the years, not only within the automotive sector.
Q-DAS CAMERA Concept
The Q-DAS CAMERA concept offers an end-to-end solution for assessing manufacturing and production in all phases of the quality data flow.
With the “right view” of your processes and the transparent presentation of process behavior using clearly structured graphics and key figures, you can identify potential for improvement and derive measures for process optimization.
But what does the acronym “CAMERA” stand for? This summarizes the 6 phases of this holistic quality approach:
– COLLECTING (manual data entry with procella My.SPC, data transfer in Q-DAS ASCII transfer format)
– ASSESSING (MCA/CMM Reporting, Q-DAS Monitoring, procella online)
– MANAGING (SPC test planning, SAP interface (QM-IDI))
– EVALUATING (qs-STAT, SAP interface (QM-STI))
– REPORTING (Reporting System, Form Designer, qs-STAT Web)
– ARCHIVING (long-term evaluation, data compression)
With our Q-DAS software modules, we offer you the tools you need to fully integrate and largely automate this entire process – from data acquisition, analysis and data archiving through to the reporting system – in your company.
TEquiM TESTING MANAGEMENT
In cooperation with our partner calibration laboratory CQS, we offer you TEquiM, a customized yet cost-effective software for managing your test equipment.
This database-based software system can read calibration protocols and certificates from the CQS calibration laboratory, integrate data via data carriers or online and even enables remote management via an Internet connection. This gives you password-protected access to all test equipment data at all times.
TEquiM can be downloaded as a demo version and tested free of charge.
VectorPro®
VectorPro is an advanced force testing software package designed to perform tensile, shear, flexure and compression tests on materials, components and products. Display measurement data graphically and quickly create individual test reports.
Simply select an ELS load cell and a set of fixtures and you’re ready to perform advanced testing with the power of VectorPro.
Our partners
CONTACT
We are here for you
Visit us at our office in Vienna or contact us by phone or e-mail. We are open Monday to Thursday from 7:30 am to 4:00 pm and Friday from 7:30 am to 2:00 pm.
